Description: 

                                   Flap disc built with brown aluminum oxide abrasive cloth and high-strength fiberglass backing plate. 

                                   Specially for dry grinding, it efficiently removes weld burrs, rust, oxide layers and rough wood surfaces, matching multiple standard angle grinder sizes.

             Applications: 

                                  1. Metal Processing: Carbon steel, iron weld seam cleaning, rust & oxide removal

                                  2. Woodworking: Rough grinding, paint stripping, surface leveling of solid wood & furniture

                                  3. Hardware & Casting: Trim casting flash, deburr metal fittings

                                  4. DIY Fabrication: Multi-purpose grinding for iron and wooden workpieces

              Advantages:

                                  1. Thick fiberglass base, anti-breakage under high-speed rotation

                                  2. Sharp brown aluminum oxide grain for fast heavy stock removal

                                  3. Dense stacked abrasive flaps, long service life with stable cutting force

                                  4. Multiple standard sizes 100/125/150/180mm for most angle grinders

                                  5. Coarse grit P50-P60 for heavy-duty rough grinding tasks

                     FAQ:

                                1. Q: Can this flap disc be used for wet grinding?

                                    A: No, it is designed only for dry grinding without water cooling.

                                2. Q: What sizes are available?

                                    A: 100×16mm, 125×22mm, 150×22mm, 180×22mm etc.

                                3. Q: Is this coarse grit suitable for fine polishing?

                                    A: P50-P60 are coarse grits, only for heavy rough grinding, not fine finish.

                                4. Q: Will the abrasive flaps fall off during heavy grinding?

                                    A: High-temperature resin bonding firmly locks flaps to avoid shedding.